SPC Flooring

SPC flooring tends to feel harder underfoot, which some might find less comfortable compared to other options. However, you can mitigate this by installing a suitable underlay. Laminate flooring has a softer feel and might offer more comfort but lacks the water resistance and durability of SPC flooring.

J2 SPC flooring is made using high quality CaCO3 (Calcium Carbonate) and various polymers to create a structurally stable and quality rigid core click floor. With the high content of stone within the product, the product is more akin to a natural stone floor, such as ceramic or porcelain tile, however the polymer element allows it to be engineered into a click together system, which makes installing upto 8 times faster than traditional tiled floors, saving time and money.

Below is a diagram of the various layers that go into producing j2 SPC flooring:

1. UV Coating

This layer is a protective polyurethane coating, it is factory applied and with regular maintenance is replenished to help protect the wear layer and keep the appearance of the flooring looking better for longer.

2. Wear Layer

This is the layer that provides the durability and guarantee length. Wear layers vary on each SPC product, but the thicker the wear layer the more durable the product. Our SPC flooring is available in two different wear layer thicknesses:

0.30mm – ZEEZOO (Plank / Herringbone & Tile)

Classed as a residential quality our 0.30mm wear layer floors are suitable for heavy domestic and light commercial.

0.50mm – CUBE

A 0.55mm wear layer is classified as general commercial quality, which means it is extra heavy domestic. Our 0.55mm wear layer SPC comes with a lifetime guarantee in residential locations.

3. Decor Layer

this is the film print, which gives the product its design feature. At j2 Flooring, we choose the most natural looking designs to ensure your floor is as authentic as possible.

4. Ultra Stable SPC Rigid Core Layer

This is the rigid core layer, which is the combination of stone and polymers formulated to give the very best and stable product. Our products use the well known Uniclic locking system which is engineered within the core to provide a simple and DIY friendly installation method.

5. Pre-Attached Underlay

All J2 SPC products come with a pre-attached sound reduction underlay. This speeds up installation and also saves money. The underlay provided is the only underlay you should use under SPC flooring, otherwise additional compression from extra underlay can cause the product to break.